ID: 33179
Advertentie ID: #33179 is toegevoegd aan uw verlanglijst.
Omschrijving
Zeer goede voorversterker voor in de studio of live, basgitaar, keyboards, zang, (akoestisch)gitaar, etc.
Eventueel ruilen tegen Grace Design 'Felix'
Multiple Paths, One Goal: Total Sonic Realism
Four distinct inputs can be optimized for any source
Instruments Twin Topology® DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state
Microphones discrete solid state HV-3 microphone preamplifier
DAW or tape outputs Discrete solid state line level amplifier
Guitar power amp inputs Speaker Soak technology
Powerful yet musical tonal shading
Two bands of mastering-grade NSEQ-2 parametric EQ; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance
Nine outputs for unlimited functionality
Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul® and Strat® pickups
Audiophile headphone output
Balanced and unbalanced monolithic outputs
Balanced and unbalanced discrete FET outputs
Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz 300 kHz
Effortlessly musical performance at all dynamic levels
Input headroom &ampgt100 V, output headroom &ampgt 30 V
100% effective hum removal with numerous ground lifts &ampamp isolations
Built for critical professional applications
Ultra-clean toroid power supply: internal sub-chassis
Gold connectors, OFC audio wiring, silver Teflon power wiring
TUBE: Selected twin triode vacuum tube amplifier (200 V)
SOLID STATE: Selected all discrete J-FET amplifier (50 V)
THD + Noise
20 Hz - 30 kHz (35 dB Gain)
0.0005% typical mic / line, 0.03% typical vacuum tube
Intermodulation Distortion
0.0009% typical mic / line, 0.03% typical vacuum tube
Frequency Response @ -3 dB points
3 Hz to 300 kHz, typical. Varies with routing &ampamp topology
Maximum Balanced Line Input Level
+23 dBu (+43 dBu with Pad engaged or &ampgt110 Volts rms)
Maximum DI Input Level (Both Tube &ampamp SS)
+18 dBu (+26 dBu with Pad engaged or &ampgt15 Volts rms)
Maximum Output Level
+32 dBu active balanced outputs, +26 dBu unbal outputs
Maximum System Gain
45 dB standard (65 dB with optional HV-3 mic preamp)
Input Impedance (DI)
Switchable: 470 kilohms / 2 megohms / 10 megohms
Noise (Mic) (60 dB gain)
-128 dB EIN, 150 ohm source, -130 dB EIN common
source
Noise (Line) (10 dB gain)
-105 dBu
Noise (DI) (10 dB gain)
-90 dBu (solid state)
Phase Error (EQ out)
Less than +/- 5 degrees 50 Hz to 20 kHz
Parametric Equalizer
Maximum Boost and Cut
+/ 15 dB (21 step detent
Q Range
Q+ 0.4 to 4.0 sweepable
Low Freq sweep
Switch In: Pure Class-A Discrete J-FETs
Hi Freq sweep
Switch Out: Pure Class-A Triode Tubes
Power Consumption
35 watts maximum
Power Requirements
Selectable: 100-120, 200-240 V ac, 50/60 Hz
Dimensions/Shipping Weight
8.5 W x 3.5 H x 13.0 D, 20 lbs.
Preamp, studio, Avalon, SST-1, Glockenklang, Focusrite
Eventueel ruilen tegen Grace Design 'Felix'
Multiple Paths, One Goal: Total Sonic Realism
Four distinct inputs can be optimized for any source
Instruments Twin Topology® DI channel; dual-triode 12AT7 vacuum tube or discrete FET solid state
Microphones discrete solid state HV-3 microphone preamplifier
DAW or tape outputs Discrete solid state line level amplifier
Guitar power amp inputs Speaker Soak technology
Powerful yet musical tonal shading
Two bands of mastering-grade NSEQ-2 parametric EQ; 20 Hz to 20 kHz center frequency, 0.4 to 4.0 Q
Optimized DI input for any instrument with variable 470 k / 2 M / 10 M impedance
Nine outputs for unlimited functionality
Patented Re-Amp outputs with custom-designed magnetics emulate Les Paul® and Strat® pickups
Audiophile headphone output
Balanced and unbalanced monolithic outputs
Balanced and unbalanced discrete FET outputs
Microphone level output with large-geometry DIT-01 transformer: -3 dB 3 Hz 300 kHz
Effortlessly musical performance at all dynamic levels
Input headroom &ampgt100 V, output headroom &ampgt 30 V
100% effective hum removal with numerous ground lifts &ampamp isolations
Built for critical professional applications
Ultra-clean toroid power supply: internal sub-chassis
Gold connectors, OFC audio wiring, silver Teflon power wiring
TUBE: Selected twin triode vacuum tube amplifier (200 V)
SOLID STATE: Selected all discrete J-FET amplifier (50 V)
THD + Noise
20 Hz - 30 kHz (35 dB Gain)
0.0005% typical mic / line, 0.03% typical vacuum tube
Intermodulation Distortion
0.0009% typical mic / line, 0.03% typical vacuum tube
Frequency Response @ -3 dB points
3 Hz to 300 kHz, typical. Varies with routing &ampamp topology
Maximum Balanced Line Input Level
+23 dBu (+43 dBu with Pad engaged or &ampgt110 Volts rms)
Maximum DI Input Level (Both Tube &ampamp SS)
+18 dBu (+26 dBu with Pad engaged or &ampgt15 Volts rms)
Maximum Output Level
+32 dBu active balanced outputs, +26 dBu unbal outputs
Maximum System Gain
45 dB standard (65 dB with optional HV-3 mic preamp)
Input Impedance (DI)
Switchable: 470 kilohms / 2 megohms / 10 megohms
Noise (Mic) (60 dB gain)
-128 dB EIN, 150 ohm source, -130 dB EIN common
source
Noise (Line) (10 dB gain)
-105 dBu
Noise (DI) (10 dB gain)
-90 dBu (solid state)
Phase Error (EQ out)
Less than +/- 5 degrees 50 Hz to 20 kHz
Parametric Equalizer
Maximum Boost and Cut
+/ 15 dB (21 step detent
Q Range
Q+ 0.4 to 4.0 sweepable
Low Freq sweep
Switch In: Pure Class-A Discrete J-FETs
Hi Freq sweep
Switch Out: Pure Class-A Triode Tubes
Power Consumption
35 watts maximum
Power Requirements
Selectable: 100-120, 200-240 V ac, 50/60 Hz
Dimensions/Shipping Weight
8.5 W x 3.5 H x 13.0 D, 20 lbs.
Preamp, studio, Avalon, SST-1, Glockenklang, Focusrite